What is sand blasting machine and Work handling system of Sandblasting machine?

Problem: Remove the oil, grease, and scale present on the surface, the projection of the abrasives removes corrosion from the surface and providing such a surface condition which has easy adhesion to the paint. We know that approximately 80% of surface failures occur when the pretreatment of the surfaces is not done properly. Therefore, this step of sand blasting machine the surface, prior to painting, galvanization or any sort of coating must not be overlooked as it is considered as the most critical stage for a good pretreatment of the surface. It is one of the easiest and the fastest way to remove old paint and rust from the metal surface.

Introduction:

Sandblasting machines are commonly used for: Abrasive blasting, more commonly known as sand blasting, is the operation of forcibly propelling a stream of abrasive media against a surface under high pressure to flatten a rough surface, roughen a smooth surface, shape a surface or remove surface contaminants.

Sand Blasting is a surface treatment process using high-velocity steel abrasive. Sand blasting is the method through which it is possible to obtain excellent cleaning and surface preparation for secondary finishing operations.

1. The cleaning of iron, steel, non-cast parts, forgings, etc.
2. Mechanical cleaning of sheets, rods, coils, wire, etc.
3. Sand peening to alter mechanical properties (increasing resistance to fatigue for springs, gears, etc.)
4. Preparing surfaces to be painted, coated, etc

Sand blasting machine working principle:

This is the process of blowing fine sand at high pressure with the help of compressed air that is passed through the nozzle at a very high velocity.

The sequences of operations in sandblasting are as follows:

• Loading of abrasives into the cylinder.
• The second step is focusing on pressurized air through the nozzle on the surface to be sandblasted.

Sand Blasting Nozzle along with controlling the pressure and velocity also helps in creating a trajectory for the blast. Pressure blast cabinet systems are the systems that are ten times more effective and quicker than the sandblasting machine. Pressure blasters Pressure blast systems are the systems that are ten times more effective and quicker than the suction blasters. They are also easier to use. They consist of a large container comprising of silica sand under high pressure. A gun is joined to the upper portion of the container with the help of a hose that can bear the abrading effects of sand. These sandblasting machine is moderately cheap and is more likely to find. They consist of three main parts.

A sandblasting machine with two hoses of which one hose is connected to the bottom of the handle and the other hose is connected to the lower side of the barrel. It has a repository of loose sand. Some type of container or bucket is formed by this type. As the gun is fired, the air creates a suction that pulls the sand into the gun. Now sand can be reused by collecting it and placing it back into the reservoir.

Pre-treatment of Surfaces in Sand Blasting machine process:

Prior to dying casting, anodization, powder coating and painting, the surface needs some sort of pretreatment or cleaning. This step is similar to laying down the foundation. This process of cleaning of the surfaces puts a heavy impact on the post processes. Therefore, this sandblasting machine is a very good surface treatment machine. Pretreatment for mild steel Tendency of material-Picking up the rust and dirt when the material is exposed to the bare atmosphere is the tendency of material and hence there is a need for sandblasting machine. Sand blasting machine is done to remove the oil, grease, rust and black scale formed on the surface. Mild steel material is also recognized for its tendency to undergoing rapid oxidation when exposed to the bare atmosphere.