Leading Suppiler &
Exporter
Trustseal Verified
ISO Certified
Manufacturer
Air Transport
Sea Transport
Land Transport
Steel shots are used to clean heavy parts of metals such as engine turbine blades, crankshafts, heavy-duty springs, etc. Steel shots are small granules of steel that are spherical and obtained by a process known as atomization. Shot Blaster also provides all types of abrasive media like aluminum oxide, copper slag, steel grit, stainless steel shots, ps ball, abrasive garnet, etc.
These steel shot media or small balls of steel are used as abrasives in many industries. They help clean surfaces of metals and compounds by taking off loose materials with shot blasting machine. They also help in the cutting of hard surfaces such as granite, removing burrs, cleaning of casting component
Steel shot price is affected by many factors. Steel shot price depends on the size and hardness of steel shot in India. When we are going to purchase any products, we have one thing always keep in mind, like where to buy those products. How do we check the quality of the product? What material was used to make that product? Etc. We need to know all this information before buying any type of product. Steel shot price also depends on the quality and quantity of steel shot in India.
The same thing applied to the steel material, Here I am explaining some detailed information about Steel Shot Price. Steel shot media refers to spherical grains made of molten steel through an atomization process, available in different sizes and hardnesses.
Industries, where these steel shot media is mainly used, are automobile, metallurgy, petrochemical, and construction. This procedure is called steel shot blasting, and it improves the surface of the metal by cleaning and clearing it. Shot Blaster is one of the largest manufacturers of steel shot products from Indian foundries.
Format of making these steel shots
| Steel Shots | Steel Shots Size |
| S70 | 0.18 - 0.35 |
| S110 | 0.30 - 0.50 |
| S170 | 0.42 - 0.71 |
| S230 | 0.59 - 0.84 |
| S280 | 0.71 - 1.00 |
| S330 | 0.84 - 1.19 |
| S390 | 1.00 - 1.41 |
| S460 | 1.19 - 1.68 |
| S550 | 1.41 - 2.00 |
| S780 | 2.00 - 2.80 |
| S930 | 2.36 - 3.35 |
1) S-780 S-660: Knock-out or descaling large cast iron, cast steel, iron pipe, forged piece, and heat treatment piece.
2) S-550 S-460: Knock-out, descaling, peening, and shaping of medium-to-large cast iron, cast steel, forged piece, heat treatment piece, steel plate, and pipe.
3) S-390 S-330: Knock-out, descaling, peening, and shaping of small-to-medium cast iron, ductile iron, cast parts, heat treatment piece, steel plate, sections, steel pipe, structural parts, chain, and non-ferrous metals.
4) S-280: Blasting small cast iron, cast part, heat treatment piece, cast aluminum, cast steel plate, and cast copper alloy before the gold-plating process to increase elasticity and toughness.
5) S-230, S-170, S-110: Shot peening stainless steel plate, thin steel plate, and nonferrous metals before the painting process to increase elasticity and toughness.
Just like the steel grit abrasive, these shots offer a lot of uses before needing replacement mostly allowing about 150 to 200 cycles, depending upon the application one is using these blasting techniques for and assuming that the professional uses the ideal blast media recovery equipment. The sizing shots made from steel come in a large variety of sizes that range between 110 – s 330.
In comparison to high-carbon steel shot, low carbon steel shot has a lower toughness. It resists impact due to its microstructure, yet when hit, it scatters/dissipates and dissolves into fine powdered dust. It is even used for flash descaling. Because low carbon steel shot is softer in nature and cannot be crushed into grits, it is utilized less.
Used in airless centrifugal wheel blast machines to clean foundry castings, surface polishing, and shot peening. Also used in portable track blast airless blasting machines for concrete floor preparation, blasting ship decks, and profiling.
Modern blasting systems allow using any type of abrasive such as sand, garnet, steel shot, copper slag, etc. to clean surfaces. Among abrasive blasting methods, steel shot blasting is one of the most effective and cheapest. Steel shot blasting has many advantages including allowing performing blasting with free silica sand. The blasting, although it can remove scale completely, does not remove any virgin metal.
How do we find the best quality steel shots?
The Steel shots have a carbon content of 0.12 – 0.17 percent by weight, It has a bainite structure and therefore possess optimum properties in terms of toughness and hardness. Our steel shot is 30% more durable than high carbon steel shots due to its low carbon content (Ervin test - K100 durability).
The hardness of the grains is defined by the carbon level. The production process of our low-carbon steel shot in India granulations is followed by the term process of drying, which has a beneficial tempering effect. The grain is free from cracks. Quality control is permanent by keeping samples of every delivery of steel shots for further laboratory examination.
This process of making this product is called granulation or atomization. Our engineers keep monitoring the process and add Ferroalloys to maintain the quality of the steel shots so manufactured. Semi-finished shots are made to undergo heat treatment to make them according to the specifications of our clients.
We are the largest steel shots manufacturer worldwide. steel shot price is low compared to others. This shot is available in a variety of different sizes but is always designed in a round shape and used for an expansive range of operations where the primary use for its application is referred to as shot peening. Shot peening hardens the surface of the product being blasted by the repeated striking of the surface with a steel shot. These repeated strikes make the metal compress which increases its strength.
Aside from shot peening, other applications that use such shots include those that demand maximal amounts of energy transmission to efficiently create an excellent surface profile. This comprises a concrete surface, rubber build-up removal, epoxy, and adhesive remover applications.
Shot Blaster is a steel shot supplier in large quantities in India, Iraq, Saudi Arabia, Kuwait, and Tunisia. In contrast to the grits, here the larger the number of the shot, the larger will be the size of the steel shot blast media, which means a shot of size s 330 will be larger than s 110. The larger steel shots abrasive is used for the removal of thicker coatings and for heavier steel penning too. Thus, to conclude, while selecting a blast media it is extremely important to understand the product you are planning to blast and the ultimate result you want to achieve after the blasting process is done.
Based on these factors the decision is made of selecting the steel shot blast media as well as the blast equipment for great execution of the project. If you find yourself confused while selecting the ideal blasting equipment or the media, a leading trader, and exporter of a huge range of metal shots and the associated set of machinery and equipment will be proud to help you as they have been developing expertise in the field since 2000.
Physical Analysis chart for Steel Shots