Delhi

Shot Blaster is the leading manufacturers of shot blasting machine in Delhi. Shot Blasting Machine is a technology that no metal industry owner can do without. Shot Blasting Machine is used in nearly every metal-using industry, including aerospace, construction, automobile, foundry, rail, shipbuilding, and many more. It's used to clean, induce strength (also called shot peening), and polish metal surfaces.

Tumblast Shot blasting machine offered in different sizes, several models and has different utilization for different cleaning and peening purposes. If we have medium-size elements or metal components that need to clean through shot blasting process in bulk or small batches then Tumblast Type Shot Blasting Machine is the most suitable for this work.

Wire comes first in the siphon plug and then in the nozzle, it completely holds the wire. The siphon plug should be cleaned occasionally. Wipe out the grooves and clean out the holes with the proper size wires from the cleaning wire kit. Do not wash the o-rings with a cleaning solvent. Examine them for damage and replace them if required.

Wire flame spray Gun Metco 12E (Metco Metalizing Gun) uses a single wire that is entered in a jet flame. The temperature is close to 10,100 K, melting the wire. The air stream from the jet atomizes the molten particles, falling them onto the substrate.

Sand blasting is basically applied to clean the exterior surface of any metal or component, mainly for the metallic exterior. It is one of the various effective and fast methods which uses compressed air to blast fine sand through a sand blasting nozzle to shape and smooth surface of each different material.

We are Leading Manufacturer, Supplier, and exporter of Sandblasting Room/Shot blasting Room/Abrasive. We also design and supply customized grit blasting room with dust collectors & the best quality sandblasting room/booths/equipment.

We are Manufacturer of Flame Spray Guns and Supplier of Matco and matco12e flame spray gun and exporter of Flame Spray Guns & Zinc Spray Gun.

In almost every manufacturing privilege a dust collection system is a vital Factor for accomplished operation. A dust collector is a system used to increase the perfection of air published from the industries and commercial procedures by collecting dust & other impurities from air or gas.

The SB 9182 is the ultimate Direct Pressure blast cabinet for small, medium and large size component. The SB 9182 is sheet cut by laser cut and hand welded 12G industrial blasting cabinet. No rivets, all grit stays in the cabinet. With a 1 cubic pressure pot, micro metering valve and ¾” piping.

In Metalizing Gun a Thermal Spraying is a group of coating processes in which finely divided metallic or nonmetallic materials are deposited in a molten or semi-molten condition to form a coating. The coating material may be in the form of powder, ceramic-rod, or wire.